Section 174A Explained
From 2022 through 2024, U.S. businesses had to capitalize research and experimental costs and amortize them over five years, a rule set by the 2017 tax law. A software company that paid $1 million in developer salaries could deduct only $100,000 in the first year, because a mid-year convention halved the first slice.
The One Big Beautiful Bill Act, signed on July 4, 2025, added Section 174A. For tax years beginning after December 31, 2024, domestic research or experimental expenditures are deductible in the year paid or incurred. Software development counts as research for this purpose. The change is permanent, with no sunset date in the statute.
Research performed outside the United States did not get the same treatment. Those costs remain under Section 174 and amortize over 15 years.
So 2026 is the second tax year under the new rule for calendar-year filers, and the last year affected by one of the transition choices.
What Filers Misjudge
The most frequent error is assuming old balances disappeared. Costs capitalized in 2022, 2023, and 2024 still sit on the tax books. The law gave three ways to recover the unamortized domestic portion: deduct all of it in the first tax year beginning after 2024, deduct it evenly over that year and the next, or keep the original five-year schedule. A company that chose the two-year route takes its second half in 2026.
Second, “domestic” depends on where the work is performed, not where the contractor is incorporated or paid. A Delaware company that hires a development shop with engineers in Poland has foreign research costs. First-year recovery on those is one-thirtieth of the amount, about 3.3%.
Third, the research credit and the deduction no longer stack freely. Under amended Section 280C(c), a taxpayer must reduce its Section 174A deduction by the amount of the credit, or elect a reduced credit instead. For 2022 through 2024 that reduction applied only in rare cases, so many preparers stopped thinking about it, which, frankly, is how errors get into 2025 and 2026 returns.
The rule also depends on records most finance teams keep loosely. You need payroll data showing where each engineer works, time or ticket data tying labor to development projects, contractor agreements stating the place of performance, and a cost schedule by year for the old capitalized amounts.
Steps For The 2026 Year
Sort Costs By Location
Split research spending into U.S. and non-U.S. buckets each month, not at year end. Use payroll work-location fields for employees and a required location line on contractor invoices. Cloud hosting used for development and testing follows the project it supports. A team with 30% of its engineering abroad will see 30% of its cost land on the 15-year schedule, and that changes quarterly estimated payments.
Finish The Old Balances
Check which transition method the 2025 return used. Rev. Proc. 2025-28, issued in August 2025, treated the choice as an accounting method change, often made by a statement attached to the return in place of Form 3115. If the return elected the two-year spread, the 2026 deduction equals the 2025 one. If it took everything in 2025, nothing remains. If it stayed on the original schedule, 2026 continues at 20% of each year’s capitalized cost. Fiscal-year filers whose first post-2024 year ends in 2026 may still have the choice open.
Choose Deduct Or Amortize
Immediate deduction is the default, but Section 174A(c) lets a taxpayer elect to capitalize domestic costs and amortize them over at least 60 months, starting when benefits are first realized. Section 59(e) offers a 10-year write-off. These suit companies with losses that would otherwise pile into net operating loss carryforwards, which can offset only 80% of taxable income in later years. Model both paths over five years before electing, because the election binds the costs it covers.
Coordinate With The Credit
Compute the Section 41 research credit first. Then decide: reduce the deduction by the full credit, or elect the reduced credit on a timely filed original return. With a 21% corporate rate, the reduced credit is 79% of the gross credit. An $80,000 credit becomes $63,200, and the full $80,000 of cost stays deductible. The two routes usually produce the same federal tax for a C corporation, but they differ for state purposes and for pass-through owners. You run the credit, pick the election, and the deduction number falls out.
Two Worked Examples
A profitable software firm. A calendar-year C corporation capitalized $1 million of U.S. development cost in each of 2022, 2023, and 2024. By the start of 2025 it had deducted 50% of the 2022 layer, 30% of the 2023 layer, and 10% of the 2024 layer, leaving $2.1 million unamortized. It elected the two-year spread: $1.05 million in 2025 and $1.05 million in 2026, on top of each year’s current research costs. At 21%, each catch-up deduction is worth about $220,500 in federal tax. The firm chose two years over one to avoid creating a 2025 loss it could not fully use.
A startup with an offshore team. A company with $4 million in gross receipts spends $600,000 on U.S. engineers and $400,000 on a contractor team in India during 2026. The $600,000 is deductible now. The $400,000 yields roughly $13,300 of amortization in 2026 and the rest over the following years. The company qualified as a small business and could have amended 2022 to 2024 returns to apply Section 174A retroactively, but that election closed on July 6, 2026. It missed the date. The old domestic balances are still recoverable through the transition rules, only later than they might have been.
Recovery Options Compared
| Cost Type | Governing Rule | Recovery Period | 2026 Effect |
|---|---|---|---|
| Domestic research, 2025 onward | Section 174A(a) | Year paid or incurred | 100% deductible, less any Section 280C reduction |
| Domestic, elective amortization | Section 174A(c) or 59(e) | At least 60 months, or 10 years | Partial deduction, smaller current loss |
| Foreign research | Section 174 | 15 years, mid-year convention | About 3.3% of new costs deductible |
| Unamortized 2022 to 2024 domestic, one-year election | OBBBA transition rule | First tax year after 2024 | Nothing left for calendar-year filers |
| Unamortized 2022 to 2024 domestic, two-year election | OBBBA transition rule | Ratably over two years | Second half deducted |
| Unamortized 2022 to 2024, no election | Original Section 174 schedule | Remaining five-year term | 20% of each layer |
Common Mistakes
Assuming the state return follows the federal one. States that conform to the Internal Revenue Code as of a fixed date may still require five-year amortization, while others never adopted it at all. A company can owe state tax in a year it shows a federal loss.
Ignoring knock-on limits. A large catch-up deduction lowers taxable income, which can shrink deductions measured against it and push a company into a loss where the 80% carryforward cap applies later. Bigger is not automatically better.
Labeling everything engineers do as research. Routine maintenance, customer support tickets, and post-release bug fixes that involve no technical uncertainty are ordinary business expenses under Section 162. For domestic costs the distinction now matters less for timing, but it still affects the credit and the foreign bucket.
Treating a foreign subsidiary’s cost-plus charge as domestic because the invoice is paid from a U.S. account. Place of performance controls, and intercompany agreements rarely say it clearly.
Forgetting the reduced-credit election must be made on an original, timely filed return. It cannot be fixed on an amended one in the ordinary case.
FAQ
Is Section 174 amortization gone for good?
For U.S.-performed research, yes, starting with tax years beginning after December 31, 2024. Foreign research still amortizes over 15 years under Section 174.
Can I still amend 2022 to 2024 returns to expense R&D?
The small business retroactive election, open to companies with average gross receipts of $31 million or less, expired on July 6, 2026. Old balances are now recovered through the transition methods.
Does software development qualify under Section 174A?
Yes. The statute treats amounts paid for software development as research or experimental expenditures, so U.S. developer wages and related costs are deductible when incurred.
How does Section 174A affect the R&D tax credit?
The credit remains available. The deduction must be reduced by the credit amount unless the taxpayer elects the reduced credit, which is 79% of the gross credit at a 21% rate.
Should a loss-making startup still expense everything?
Not always. Electing 60-month amortization can preserve deductions for profitable years and limit the effect of the 80% cap on loss carryforwards. Run a multi-year projection first.
Author’s Insight
Reading the statute alongside Rev. Proc. 2025-28, the design choice that stands out is the split by geography. Congress restored expensing for U.S. work and left the 15-year schedule on foreign work untouched, which turns a staffing decision into a tax decision. For a company with mixed teams, the after-tax cost gap between a U.S. and an offshore engineer narrowed in 2025 and stays narrowed in 2026. The transition rules were generous but time-boxed, and the retroactive window for small businesses has already shut. What remains is mostly bookkeeping discipline: knowing where work happens and which old cost layers are still on the schedule.
Final Thoughts
- Domestic research and software development costs are deductible in full for tax years beginning after 2024, with no expiry date.
- Foreign research stays on a 15-year schedule, so track place of performance for every engineer and contractor.
- If the two-year catch-up was elected for 2022 to 2024 balances, the second half is deducted in 2026.
- Section 280C(c) now forces a choice between reducing the deduction and taking a reduced credit.
- Elective amortization over 60 months or 10 years can suit companies in a loss position.
- State rules differ, and the small business retroactive election closed on July 6, 2026.
- This article is general education, not tax advice. Elections here are method changes with lasting effects, so review them with a qualified tax adviser before filing.